Home

Metal shredder

Product Introduction:

A twin‑shaft shredder utilizes two sets of counter‑rotating cutting blades to form a V‑shaped shredding cavity, generating shear forces that break down materials. Once the material enters the gap between the blade pairs, it is torn and sheared by these forces until it reaches the desired size. It is primarily used for the pre‑processing of bulky materials, the pre‑treatment of solid waste, volume reduction, and resource recovery.

Category:

Dual-axis shredder

Keywords:

Solid Waste Shredder

Dual-axis shredder

shredder

shredding

before

aluminum

Twin Shaft Shredder (Twin Shaft Crusher)

Metal Shredder

shredded

materials.

Shredder

crushing

Message

Mobile: +86-13802454899

Scope of Application

Lightweight metals, iron drums, paint buckets, household appliances, electronic products, zinc alloys, aluminum alloys.

Before shredding aluminum alloy

After aluminum alloy is shredded

Before the car engine is shredded

After the car engine is shredded

Before the iron bucket is torn to shreds

Before and after shredding the iron drum

Before shredding the circuit board

After the circuit board is shredded

Equipment Overview

A twin‑shaft shredder utilizes two sets of counter‑rotating cutting blades to form a V‑shaped crushing chamber, generating shear forces that break down materials. Once material enters the gap between the blade pairs, it is torn and sheared by these forces until it reaches the desired size. It is primarily used for the pre‑processing of bulky materials, the pre‑treatment of solid waste, volume reduction, and resource recovery.

Technical Features

The entire system complies with CE safety standards.

Low-speed, high-torque shearing

Low dust, low noise

Wear-resistant design, low maintenance frequency.

The cutting tool is made from high-strength alloy and heat-treated, making it suitable for shearing a wide range of materials.

The housing features a modular design, equipped with independent side panels and bearing housings for easy maintenance.

Supports non-standard customization

High-precision enclosure

Wear-resistant, high-strength cutting tools

Branded gearbox

Intelligent electronic control

Imported bearings

Specification Sheet

Device model	SHJ-2665	SHJ-32100	SHJ-38120	SHJ-50160	SHJ-70250
Shredder chamber dimensions (mm)	650×500	1000×650	1200×800	1600×1000	2500×1500
Motor power (kW)	37	30×2	45×2	75×2	110×2
Turning tool diameter (Φmm)	260	320	380	500	700
Turning tool thickness (mm)	20-40	30-50	30-75	50-100	80-150
Spindle speed (rpm)	20/30	20/30	15/20	10/15	5/8
Mechanical dimensions (mm)	1980×1500×1760	2800×1600×1800	4500×2200×2500	5600×2800×3100	6900×3500×3600
Equipment Weight (kg)	2300	5600	8500	23600	39600

Note: For more models, please call for inquiries.

None

Large‑capacity plastic shredder

Product Inquiry

Submit